CM Yachts

[HOME] [ONE METRES] [MARBLEHEADS] [6 METRE] [LASER] [A600]

Contact Name

Michael Clifton

Telephone

01234 822408

FAX

01234 822699

Postal address

Five Oaks

Church Lane

Oakley

Beds MK43 7RU

England

This site is still Under heavy construction

6 METRE

Interest in this class continues particularly with those that like a boat that has more traditional lines. Over the last few years there has been the trend has been towards narrower boats and Rococo is one of those.

Click on the thumbnail to view pictures.

ROCOCO - designed by Graham Bantock this was a design that Henry Farley set out to build a mould in order to produce a carbon hull. The original plan had been intended for wooden construction. Indications were that this was going to be a good boat. However unfortunately Henry fell fowl of the problems of working with Resins and ended up in hospital. At this point CM Yachts stepped in to take over production.

Specifications - The hulls are constructed from Ampreg Pregel gel coat, with added pigment to the colour of your choice. Ampreg 20 resin is used for laying up the cloth, which can be either 2 layers of 200gm carbon or 1 layer 120gm carbon and 1 layer of 200gm carbon with localised reinforcing.

Pricing & Information Request Form

Please complete the below form to receive a quote on any items selected. Click "Submit Quote" at the bottom of the page when complete. A quotation and a estimated delivery date will be returned ASAP.

Design	Description	Price
Rococo - Hull 1	Hull only 200/200gm carbon lay up	£270.00
Rococo - Hull 2	Hull only 120/200gm carbon lay up	£300.00
Deck parts, etc.	Forward beam, carbon construction with track inserts	£35.00
	Centre deck, carbon construction	£47.00
	Rear deck beam, carbon construction	£12.00
	Winch/Servo trays	£12.00
	Fin box	£45.00
Rococo - Hull 3	Hull 1 with deck sections, winch/servo trays and fin box assembled	£525.00
Rococo - Hull 4	Hull 2 with deck sections, winch/servo trays and fin box assembled	£555.00
	Fin	£80.00
	Fin bolt and nuts	£6.00
	Rudder	£45.00
Rococo - Hull 5	Completed Hull 1 with deck sections, winch/servo trays and fin box fitted. Deck fittings fitted. Fin and rudder	£795.00
Rococo - Hull 6	Completed Hull 2 with deck sections, winch/servo trays and fin box fitted. Deck fittings fitted. Fin and rudder	£845.00

Ballast, fin and rudder
207	Winged planform, cast in sand	£86.00
208	Winged planform, HF design, cast in sand	£70.00
14	Carbon fin	£80.00
	Fin bolt and nuts	£6.00
33	Carbon rudder with carbon stock fitted	£45.00
Standard Deck Fitting pack
Rococo - Deck track, track slides, eyebolts, rigging screws, hook wire, wire and crimps, screw top radio pot, pulley blocks, sheet leads, mainsheet post, tiller arm, rudder post top bearing, fairlead, bung, bow bumper, aerial, non snag hook, dyneema		£75.70
Building costs for completion of various sections
To trim and fit removable ballast to fin		£25.00
To prepare ballast for painting and apply primer		£24.00
To fit servo, winch, switch from		£5.00
Deck patch material: ½ metre of deck patch material. Colours available Black, White, Maroon, Pink, Blue, Yellow and Orange.		£6.00

Contact Details

*Name:*
*Address:*
*E-mail:*
*Phone:*

This Form will be sent via your e-mail program. I WILL CONFIRM RECEIPT OF YOUR FORM VIA EMAIL. IF YOU DO NOT RECEIVE AN EMAIL FROM ME WITH IN 2 DAYS PLEASE SUBMIT YOUR ENTRY AGAIN.

Send mail to Michael Clifton with questions or comments about this web site.

Disclaimer.
Last modified: 09/23/04